Sourcing desk · South Jinqiao Area, Pudong, Shanghai sale@machinerychina.org +86 21 6044 5623

Knowledge base · Engines & components

Compaction Equipment

75 words About 1 min read Published by YJMT
Compaction Equipment

Photo: Construction Machinery on Site - geograph.org.uk - 196825 by Kokai · CC BY-SA 2.0 via Wikimedia Commons

Answer The SV216 features an operating weight of 31,553 lb (14 325 kg) and has a 148 horsepower (110 kW) engine. Case SV200 Series rollers have maximum working speeds up to 3.72 mph (6 kph), the rollers are built for efficient compaction.

The SV216 features an operating weight of 31,553 lb (14 325 kg) and has a 148 horsepower (110 kW) engine. Case SV200 Series rollers have maximum working speeds up to 3.72 mph (6 kph), the rollers are built for efficient compaction. and with the industry”s largest fuel tanks (69 to 108 gallons), Case rollers can operate up to 36 hours between refills.







SV216
Engine
110 kW

148 hp

Operating Weight
14 325 kg

31,553 lb

Drum Width
2.2 m

87 in

Ground Clearance
.42 m

16.5 in

Vibration Modes
2

2

Technical context from YJMT

The principles behind compaction plant selection

The text above is an archived manufacturer announcement. The notes below are ours: general guidance on this class of equipment, with no specification attributed to any named product.

Compaction is soil-specific

There is no general-purpose compactor. Granular soils — sand, gravel, crushed rock — compact by vibration, which rearranges particles into a denser packing. Cohesive soils — clays and silts — do not respond usefully to vibration; they need kneading and impact, which is what a padfoot or sheepsfoot drum provides. Using the wrong machine produces a surface that tests well and a layer beneath it that does not.

The variables that govern the result

  • Lift thickness. The dominant variable. Every machine has a depth beyond which it compacts only the upper part of the layer. Reducing lift thickness fixes more compaction failures than any other change.
  • Moisture content. Soil compacts best near its optimum moisture content, established by a Proctor test. Too dry and particles will not move; too wet and pore water carries the load.
  • Amplitude and frequency. High amplitude and low frequency drive energy deep into thick lifts; low amplitude and high frequency finish the surface. Many drums offer both.
  • Number of passes. Density gains fall away rapidly. Past the optimum, a vibratory roller starts loosening the surface it has just compacted.

Verification

Pass counting is not verification. Density must be measured — nuclear gauge, sand replacement, or a light weight deflectometer for a stiffness-based check — and compared against the specified proportion of maximum dry density.

Intelligent compaction systems measure drum response continuously and map coverage, which finds soft spots that spot testing misses by chance.

Sourcing desk

Need the machine, not just the theory?

Send the specification and destination port. You get a factory-direct price, lead time and shipping estimate within two business days.