Sourcing desk · South Jinqiao Area, Pudong, Shanghai sale@machinerychina.org +86 21 6044 5623

Knowledge base · Mining & minerals

DITCH WITCH FM25 FLUID MIXING SYSTEM

78 words About 1 min read Published by YJMT
Answer The Ditch Witch organization is pleased to announce the release of its new fluid mixing system: the Ditch Witch® FM25, reliable, low-maintenance system used to mix the drilling fluid used in horizontal directional drilling (HDD)…

The Ditch Witch organization is pleased to announce the release of its new fluid mixing system: the Ditch Witch® FM25, reliable, low-maintenance system used to mix the drilling fluid used in horizontal directional drilling (HDD) operations.


To find out more about the FM25, please visit the Ditch Witch press Center, where you can download a press release and high-res photo. if you need anything, just send me an e-mail. Thank you for your continued support of Ditch Witch products.

Technical context from YJMT

Why drilling fluid decides the outcome of an HDD bore

The text above is an archived manufacturer announcement. The notes below are ours: general guidance on this class of equipment, with no specification attributed to any named product.

The fluid does four jobs at once

In horizontal directional drilling the fluid is not a lubricant added for convenience. It carries cuttings back to the entry pit, stabilises the borehole so it does not collapse, cools and lubricates the cutting head and the product pipe, and transmits hydraulic power to a downhole motor where one is used. A bore fails for fluid reasons far more often than for machine reasons.

What it is made from

The base is water, and the water's own chemistry matters — hardness and pH affect how bentonite hydrates. Bentonite clay provides viscosity and builds the filter cake that seals the bore wall. Polymers are added to control fluid loss, to inhibit reactive clays from swelling, or to carry cuttings in sand where bentonite alone performs poorly.

Different ground demands genuinely different mixes. A recipe that works in sand may be wrong in reactive clay.

Mixing properly

Bentonite must hydrate to work, which takes both shear energy and time. Powder stirred briefly into a tank gives a fluid that looks mixed and performs badly, wasting material and risking the bore. A mixing system exists to apply consistent shear and to let the mix rest before use.

Viscosity is checked in the field with a Marsh funnel, timing a measured volume — a simple, repeatable check that should be recorded rather than judged by eye.

Containment

Returns must be contained, collected and disposed of correctly. An inadvertent return to the surface is both an environmental incident and a sign that the bore is not behaving as planned.

Sourcing desk

Need the machine, not just the theory?

Send the specification and destination port. You get a factory-direct price, lead time and shipping estimate within two business days.