Knowledge base · Cranes & lifting
Double Girder Gantry Crane
Double Girder Gantry Crane
Gantry crane is similar to an overhead crane except that the bridge for carrying the trolley or trolleys is rigidly supported on two or more legs running on fixed rails or other runway.
The EOT gantry crane functions similarly to an overhead bridge crane, but has rails installed on the ground and gantry-style legs to support the crane
Technical context from YJMT
When a double girder gantry earns its cost
The text above is an archived manufacturer announcement. The notes below are ours: general guidance on this class of equipment, with no specification attributed to any named product.
The structural difference
A single girder gantry hangs its hoist from the underside of one beam. A double girder gantry carries the trolley on rails on top of two beams. That change buys three things: greater hook height for the same overall crane height, higher capacity for the same span, and room on the bridge for walkways, magnets, grabs and heavy festoon.
It costs more in steel, in wheel load and in foundation, so it is specified when one of those three gains is actually needed — not by default.
Hook height is usually the deciding factor
With the trolley above the girders rather than below them, the hook can rise closer to the underside of the bridge. On a fixed-height building or a yard with a height restriction, that difference frequently decides which configuration will do the job at all.
What to define before requesting a quotation
- Span and the rail centres, and whether the runway already exists.
- Capacity at the hook, including the lifting beam, grab or magnet, not just the load.
- Lift height and required approach dimensions — how close the hook must get to each end of the span.
- Duty group. FEM or ISO classification, derived from the load spectrum and the number of cycles, sizes the mechanisms and the structure. Understating it is the usual reason a crane wears out early.
- Environment. Outdoor gantries need wind loading, storm anchors and rail clamps; hot or corrosive environments change the specification of everything.
Sourcing desk
Need the machine, not just the theory?
Send the specification and destination port. You get a factory-direct price, lead time and shipping estimate within two business days.