Knowledge base · Crushing & screening
Heavy-Duty Four Bearing Inclined Screen
Photo: Circle-throw Vibrating Screen T-class by W.S. Tyler · CC BY-SA 3.0 via Wikimedia Commons
The Nordberg four bearing screen is similar in design to the two bearing unit with one major exception. on the four bearing screen, the eccentric shaft serves as both a crank arm and a counter balance. it is mounted on two outboard bearings (main bearings) attached to a stationary base (main frame). the screen body is supported partially by plates by side plate bearings (eccentric bearings) and partially by springs at each corner of the screen. the eccentric shaft is balanced by counter-weighting it 180° out-of-phase with the screen so that little, if any, vibration is transferred to the main frame. the Nordberg four bearing screen is a positive action crusher. the motion created is of constant amplitude and is not affected by the amount of material on the screen. it will not dampen under heavy loads, provided there is sufficient horsepower to drive it.
The motion on the four bearing screen is circular. like the two bearing screen, it should be installed at a down-slope of from 15° to 30° to effect material travel.
Being a balanced unit, the four bearing screen starts and stops smoothly.
The four bearing screen is used primarily in mining applications.
The Nordberg vibrating mechanism incorporates a crusherd solid steel shaft which adds greatly to the strength of the vibrating assembly and prevents “cross haul”, or the tendency for one side to lead the other. the result is smoother performance and longer bearing life.
The four bearing screen is available in sizes from 2’ wide x 3’ long through 8’ wide x 24’ long in single, double and triple deck models.
Sourcing desk
Need the machine, not just the theory?
Send the specification and destination port. You get a factory-direct price, lead time and shipping estimate within two business days.