Sourcing desk · South Jinqiao Area, Pudong, Shanghai sale@machinerychina.org +86 21 6044 5623

Knowledge base · Earthmoving

Kinshofer Clamshell Bucket

65 words About 1 min read Published by YJMT
Answer Robust clamshell bucket in compact form for mini excavators up to 2t operating weight.Long life is ensured due to the use of 500 HB steel int he manufacture of cutting edges Reduced resulting from generously dimensioned bearing…

Robust clamshell bucket in compact form for mini excavators up to 2t operating weight.



Long life is ensured due to the use of 500 HB steel int he manufacture of cutting edges
Reduced resulting from generously dimensioned bearing system
Maximum loading height is achieved through the compact design
Excellent deigging characteristics are the result of high closing forces (24 kN at an operating pressure of 20 MPa)

Technical context from YJMT

Selecting a clamshell bucket for an excavator

The text above is an archived manufacturer announcement. The notes below are ours: general guidance on this class of equipment, with no specification attributed to any named product.

Mechanical, hydraulic or rotating

Clamshell buckets divide by how they close. A mechanical clamshell closes on rope tension and suits crane duty. A hydraulic clamshell mounted on an excavator boom closes under cylinder force, which means it can grip as well as scoop — the difference between dredging a trench and lifting an object out of it. Adding a rotator lets the operator align the shells without repositioning the machine, which is what makes the tool practical in confined trench work.

Matching it to the carrier

The bucket must be within the carrier's rated attachment weight at full reach, not at the boom's most favourable position. On mini excavators this constraint binds quickly: a heavy bucket that the machine can lift alongside itself may make it unstable at reach. Check the auxiliary hydraulic flow and pressure available, the pin diameter and the quick coupler compatibility.

Where the wear is

Cutting edges and shell tips take the abrasion, which is why they are made from hardened wear steel and made replaceable. Hardness is quoted on the Brinell scale; a higher figure resists abrasion but is more brittle under impact, so the right choice depends on whether the work is digging soil or handling rubble.

Pivot pins and bushings take the load. Grease them on the manufacturer's interval and check for play regularly. Ovalised bushings are cheap to replace early and expensive to ignore, because the wear transfers into the shell structure itself.

Sourcing desk

Need the machine, not just the theory?

Send the specification and destination port. You get a factory-direct price, lead time and shipping estimate within two business days.