Sourcing desk · South Jinqiao Area, Pudong, Shanghai sale@machinerychina.org +86 21 6044 5623

Knowledge base · Cranes & lifting

Question About Tower Crane - 1

259 words About 1 min read Published by YJMT
Tower crane
Answer How often should you check your tower locking nuts and pins? A. Daily B. Weekly C. Monthly When climbing a ladder what safety position should you hold? A. Centre rung of ladder B. Outside rail of ladder C.

How often should you check your tower locking nuts and pins? A. Daily B. Weekly C. Monthly

When climbing a ladder what safety position should you hold? A. Centre rung of ladder B. Outside rail of ladder C. Does not matter where you hold on to

If your crane is fitted with a lift, how often should it be checked and tested by a competent person? A. Six months B. Weekly C. Yearly

Tower cranes must be load tested in accordance with BS7121. How often should this be done? A. 6 years B. 4 yearly, after each erection of crane or after any alterations or repairs C. Yearly

If your crane is fitted with a slip ring. This will prevent? A. The crane slipping over B. Rotating the crane more than three times C. The main electrical cable snapping

Limit switches are fitted to all cranes what is the minimum standard of the switches? A. IP60 B. IP65 C. IP67

How often should limit switches be checked? A. Weekly B. Monthly C. Six monthly

How often should you limit switch be checked in sub zero temperatures? A. Weekly B. Daily C. Twice a week

Is the setting of the limit switch allowed to be changed by the operator? A. No never B. Only when the load is to heavy C. When told to do so by site agent

How would you check that unauthorised personnel have not re calibrated a limit switch? A. Ask the banksman B. Known weight to a known location C. Use test button if fitted

Sourcing desk

Need the machine, not just the theory?

Send the specification and destination port. You get a factory-direct price, lead time and shipping estimate within two business days.