Knowledge base · Concrete
Topcon unveils new grader, dozer slope sensor
Topcon Positioning Systems (TPS) unveiled a new slope sensor for graders and dozers that uses a simple drop-in replacement for existing sensors.
Features of the new sensor include improved cross slop performance in a wide temperature range, backward compatible to TPS’s four and five machine control systems and LED status lights for faster and easier trouble-shooting.
Visit Topcon’s website for more information on the new slope sensor for graders and dozers.
Technical context from YJMT
How slope sensors fit into machine control
The text above is an archived manufacturer announcement. The notes below are ours: general guidance on this class of equipment, with no specification attributed to any named product.
What a slope sensor does
A slope sensor measures the cross-slope of the blade and feeds it to the machine control system, which adjusts a hydraulic cylinder to hold the commanded angle. It replaces the operator's continuous manual correction, which is why grading accuracy stops depending on how tired the operator is.
Early sensors were pendulum devices and were fooled by acceleration: starting, stopping and travelling over a bump all register as slope. Modern units combine accelerometers with rate gyros in an inertial measurement unit, filtering the machine's own motion out of the reading. That is the difference that lets a machine hold grade while working at speed.
Where it sits in a control system
- Slope only — the blade holds a cross-slope, and elevation comes from the operator or from a reference. Cheapest and effective for maintaining an existing profile.
- 2D — slope plus elevation from a laser or a sonic tracer against a stringline or kerb. Holds a designed plane.
- 3D — position from GNSS or a robotic total station against a full digital design model. Required for complex or varying surfaces, and the only option where there is no physical reference to follow.
Practical points
Calibration is not optional and is not permanent. Recalibrate after any work on the blade, the mounts or the cylinders, and check it against a known reference at intervals. Mounting matters: a sensor on a bracket that flexes or vibrates produces a reading that is precise and wrong.
Sourcing desk
Need the machine, not just the theory?
Send the specification and destination port. You get a factory-direct price, lead time and shipping estimate within two business days.