Knowledge base · Trucks & vehicles
Vertical masts for people elevation
The ideal platform for difficult- to-reach places, masts climb directly to a working height of 6 to 12m (low range of rotation). Intended mainly for maintenance work and warehouse inventories, they can be used both outdoors and indoors, where their white tyres do not leave marks and respect all types of floor surface.
Technical context from YJMT
Vertical mast lifts compared with scissors and booms
The text above is an archived manufacturer announcement. The notes below are ours: general guidance on this class of equipment, with no specification attributed to any named product.
Where a mast lift fits
A vertical mast lift raises a small platform straight up a telescoping mast. It exists for one job: getting a person and a few tools to height in a space too tight for anything else. Typical working heights run from roughly 6 to 12 metres. The platform is small, the footprint is narrow enough for a standard doorway, and many models are light enough to work on a finished floor slab.
That specialisation is also its limit. A mast lift gives little or no horizontal outreach, so the operator must be able to position the base directly beneath the work.
Choosing between the three families
- Vertical mast — maintenance, lighting, ducting, warehouse picking. Narrow, light, minimal outreach.
- Scissor lift — a larger platform and higher capacity at similar heights, for two operators or materials, but a much wider chassis.
- Boom lift — the only choice when the work is over an obstruction, since it provides genuine horizontal reach and up-and-over capability.
Practical checks
Working height and platform height differ by roughly two metres; specifications may quote either, so confirm which. Check the rated capacity with the operator, tools and materials all counted. For indoor work, confirm non-marking tyres and the floor loading the machine imposes, which is concentrated on a small footprint. Outdoor use brings a wind-speed limit and a much stricter requirement for level ground.
Sourcing desk
Need the machine, not just the theory?
Send the specification and destination port. You get a factory-direct price, lead time and shipping estimate within two business days.