Knowledge base · Crushing & screening
Vibrating Inclined Screen CVB: Mechanism and Frame
Photo: Circle-throw Vibrating Screen T-class by W.S. Tyler · CC BY-SA 3.0 via Wikimedia Commons
The vibrating single shaft screens shown in this manual are the result of considerable experience. they are efficient, tough, perfectly balanced and designed for low cost operation.
They are used either for primary screening or for the classification of finished products. all models up to the CVB 1845 can be equipped with 2, 3, or 4 screen decks. So, 3, 4, or 5 graduations can be obtained. CVB 2245 and 2255 are equipped with 2 or 3 decks only.
Type of Vibration
Circular vibration by far is the most common. it makes rapid segregation pushing the fine particles to the screen surface facilitating the passing of the material through the mesh. the screens are always inclined to aid the material flow by gravity.
Mechanism
The mechanism, generating the vibration, consists of one shaft supported by 2 sets of roller bearings which is located in the center of gravity of the casing.
Adjustable counterweights are wedged to each end of the shaft. this assembly is in a protective housing and is driven by a special pulley which does not transmit the varying tensions of the V-belt drive. the drive assembly can be mounted on each side. the bearing housing is bolted to the side plates. the bearings are lubricated with either grease or oil depending on the type of screen.
The Frame
The frame is inclined to 16 to 20° and is adjustable through additional shims.
Sourcing desk
Need the machine, not just the theory?
Send the specification and destination port. You get a factory-direct price, lead time and shipping estimate within two business days.