Sourcing desk · South Jinqiao Area, Pudong, Shanghai sale@machinerychina.org +86 21 6044 5623

Knowledge base · Cranes & lifting

Automatic Safe Load Indicators of Cranes

742 words About 3 min read Published by YJMT
Cranes
Answer Every crane of a type prescribed by order of the Minister for Social Security must be fitted with an automatic safe load indicator (A.S.L.I.) of an approved type. An A.S.L.I.

Every crane of a type prescribed by order of the Minister for Social Security must be fitted with an automatic safe load indicator (A.S.L.I.) of an approved type.

An A.S.L.I. is a technical device which measures the load being carried by a crane and provides the operator of the crane with warning signals when the load approaches the safe working load of the crane and also when the safe working load is exceeded. It is the principle safety device for protecting the crane against overloading and the resultant risks of severely straining structural and/or mechanical parts.

The following types of crane have been prescribed in an Order dated 22nd March, 1979 (Cranes (Automatic Safe Load Indicators) (Jersey) Order, 1979, R & O 6632), as being the kind to which an approved indicator must be fitted

  • Mobile Cranes
  • Tower Cranes which have: a jib; a safe working load of at least 1000 k.g.; a safe working load which varies according to the operating radius or inclination of the jib. This Order does not apply to hydraulically operated jib cranes which are fitted to goods vehicles (lorries) and which are designed solely for the purpose of loading and unloading goods and materials from the platform of the vehicle.

A.S.L.I.’s must be of a type approved by the Minister for Social Security. An approval has been issued for A.S.L.I.’s of the electro-mechanical type which sense the load on a crane by monitoring any one or combination of the following

  • Deflections of part or parts of the crane structure
  • Tensions of the crane’s rope systems
  • Pressures in the crane’s hydraulic circuits and which conform to British Standard 7262:1990 "Specification for automatic safe load indicators".

A.S.L.I.’s of types which are not within the scope of the British Standard specification are required to be submitted to the Minister for approval. The criteria for such approval is as follows

  • The approving authority must specify that the indicator is: i) right in concept; ii) robust in construction; and iii) capable of sustaining an acceptable standard of performance.
  • All indicators must give two distinct warnings: i) a clear, continuous visual warning to the crane operator whenever the load being lifted is between 90% and 97% of the safe working load; ii) a clear and continuous sound warning to the crane operator and anyone else in the vicinity whenever the load being lifted is between 1021/2% and 110% and above, of the safe working load.
  • The indicator must be permanently and plainly marked with the following information: i) the name of the maker and trade name; ii) the date of manufacture; ii) serial number or other means of identification; iv) the number and date of the certificate of approval.

Automatic safe load indicators must be tested and thoroughly examined by a competent person once in every period of six months.

A.S.L.I.'s must also be tested when the crane to which the indicator is fitted has:

  • been wholly or partly dismantled; and
  • after any erection, alteration or removal of the crane which is likely to have affected the proper operation of the indicator. A report of the results of these tests must be made on the form provided for this purpose by the Minister for Social Security, see Appendix I, form number CLA.4.

One of the tests required is the suspension of a known weight at the appropriate radius of inclination of the crane jib, so that the appropriate margins of tolerance can be assessed as specified in the Certificate of Approval of the indicator, and also to check that the settings of the indicator have not altered.

Many A.S.L.I.'s are provided with a test button and this button only checks one part of the indicator, i.e. the electrical circuit - it does not check the whole system. It does not confirm that the automatic safe load indicator has been properly assembled or that the correct cam has been fitted for the appropriate duty of the crane.

Provided that he has been fully instructed and also possesses the necessary practical and theoretical knowledge, the crane operator may be competent to carry out the task of testing the automatic safe load indicator. This would include the setting up of the automatic safe load indicator for the appropriate crane assembly. On some cranes, A.S.L.I.'s must be set up so that they receive the correct information on jib length, jib angle, load weight, and the amount of rope falls used, before the indicator will function accurately.

Sourcing desk

Need the machine, not just the theory?

Send the specification and destination port. You get a factory-direct price, lead time and shipping estimate within two business days.