Sourcing desk · South Jinqiao Area, Pudong, Shanghai sale@machinerychina.org +86 21 6044 5623

Knowledge base · Cranes & lifting

Mine Hoist Drum Grooving

457 words About 2 min read Published by YJMT
Overhead crane
Answer There are four types of drum grooving onMine Hoists; Helical, Parallel, Counterbalance and Anti-Synchronous.Helical grooving is a continuous spiral giving very smooth winding with a single layer of rope.

There are four types of drum grooving onMine Hoists; Helical, Parallel, Counterbalance and Anti-Synchronous.

Helical grooving is a continuous spiral giving very smooth winding with a single layer of rope. it has also been used with multi-layer windings.

Parallel grooving is made up for individual grooves evenly spaced over the drum width. this grooving is used for single layer winding. it is never user for multi-layer winding since the wire rope must cross the crest of the groove to get from one groove to the next. this grooving is no longer recommended for new drums.

Counterbalance (Lebus) grooving is a combination of parallel and helical. the Counterbalance groove travels parallel for one half turn of the drum and then pitches over just one half of the groove width. it continues parallel for the other half turn of the drum and then pitches over the other half of the groove width. with this groove and multi-layer winding, the rope pitches over just half as much at the crossover points as it does with multi-layer windings on helical and parallel grooves. this type of grooving is most desirable for high speed multi-layer winding since it reduces rope whip at the crossover.

Anti-Synchronous grooving same as Counterbalance spooling except the crossover sections are 150 degrees and 210 degrees apart rather than 180 degrees or some combination of degrees adding up to 360 degrees.

Sourcing desk

Need the machine, not just the theory?

Send the specification and destination port. You get a factory-direct price, lead time and shipping estimate within two business days.