Sourcing desk · South Jinqiao Area, Pudong, Shanghai sale@machinerychina.org +86 21 6044 5623

Knowledge base · Cranes & lifting

Crane Lifting Operations - Teagle Openings and Similar Doorways

60 words About 1 min read Published by YJMT
Gantry crane
Answer A teagle opening is an opening in the side of a building, usually above ground level through which goods and materials are raised, lowered or suspended. When not in use, the opening must be securely fenced in at all times.

A teagle opening is an opening in the side of a building, usually above ground level through which goods and materials are raised, lowered or suspended.

When not in use, the opening must be securely fenced in at all times. when the fencing is removed for use, the opening must be provided with a secure hand hold on each side.

Technical context from YJMT

Working safely at a teagle opening

The text above is an archived manufacturer announcement. The notes below are ours: general guidance on this class of equipment, with no specification attributed to any named product.

What the hazard is

A teagle opening is a doorway in the face of a building, above ground level, used to raise and lower goods. Older mills, warehouses and farm buildings are full of them. The hazard is simple and severe: an unguarded opening in a wall at height, often in a working area, sometimes with a hoist beam projecting through it.

The risk is not confined to the moment of lifting. Most falls through such openings happen when nobody is lifting anything — someone steps back, moves a pallet, or opens the door to look out.

Controls in order of reliability

  1. Physical guarding that stays in place. A fixed guardrail and toe board across the opening, removed only for the lift itself, is more reliable than any procedure.
  2. Self-closing gates or sliding barriers where the opening is used often, so the protection restores itself rather than depending on someone remembering.
  3. Doors kept locked shut when the opening is out of use, with the key controlled.
  4. Edge protection and a safe working position for the person receiving the load, so nobody has to lean out to reach a landing load.

Before the lift

Verify the hoist beam or padstone itself. In older buildings these are frequently corroded, undocumented and never tested; a beam that has always been there is not evidence that it is safe. Confirm the safe working load, inspect the anchorage and the surrounding masonry, and treat an unproven beam as unusable until examined by a competent person.

Sourcing desk

Need the machine, not just the theory?

Send the specification and destination port. You get a factory-direct price, lead time and shipping estimate within two business days.