Sourcing desk · South Jinqiao Area, Pudong, Shanghai sale@machinerychina.org +86 21 6044 5623

Knowledge base · Cranes & lifting

Emergency Braking for Mine Hoist

571 words About 3 min read Published by YJMT
Overhead crane
Answer Emergency Braking – Bringing the hoist to a controlled, smooth stop after a total power failure is the most important brake function. this has not been a problem for drum hoists at depths to approximately 3000 feet, nor is it a problem with…

Emergency Braking – Bringing the hoist to a controlled, smooth stop after a total power failure is the most important brake function. this has not been a problem for drum hoists at depths to approximately 3000 feet, nor is it a problem with Koepe hoists where the system is either in balance when empty or maximum out of balance when loaded. on a double drum hoist at depths below 3000 feet, however, the rope weight and conveyance, whether loaded or empty, can create such a wide variance of braking requirements that a more sophisticated brake control is required.

There are several emergency braking arrangements available: varying braking pressure with depth and/or hoisting direction; firing off a sequence of valves applying braking as needed according to a feedback rate; setting the brake rapidly until the feedback system dictates that rate must be held until stopping; and the Nordberg emergency braking system.

The Nordberg emergency braking system* incorporates an electronically regulated, hydraulically operated governor which can be set to bring a conveyance to rest with a preset limiting maximum deceleration rate during a total power failure. this braking system incorporates c continuous “feedback” of hoist speed during emergency deceleration and compares this actual speed to a preset speed reference signal from the governor. should the actual speed of the conveyance be greater than required by the reference signal, the governor applies the brake in proportion to the difference in signals. if the actual conveyance speed is less than the preset reference signal, the governor releases the brake. System stability is provided by matching the reaction times of the brake and governor. the Nordberg emergency braking system has been utilized and is available in any of the three braking schemes.

Sourcing desk

Need the machine, not just the theory?

Send the specification and destination port. You get a factory-direct price, lead time and shipping estimate within two business days.