Sourcing desk · South Jinqiao Area, Pudong, Shanghai sale@machinerychina.org +86 21 6044 5623

Knowledge base · General engineering

Delineation Sheeting

53 words About 1 min read Published by YJMT
Answer Abrasion resistant delineation sheeting from Reflexite is brilliantly retroflective at night and can be seen most commonly on guardrail markings.

Abrasion resistant delineation sheeting from Reflexite is brilliantly retroflective at night and can be seen most commonly on guardrail markings. Reflexive delineation sheeting is used for reflectors that are mounted on guardrails, barriers and delineator posts.



Colors available are red, white, and yellow
Maximum sheeting width is 30 inches
Minimum silt width is 0.250 inches

Technical context from YJMT

How retroreflective sheeting is graded and why it fades

The text above is an archived manufacturer announcement. The notes below are ours: general guidance on this class of equipment, with no specification attributed to any named product.

What retroreflection actually is

Retroreflective sheeting returns light towards its source rather than scattering it, which is why a guardrail marker lights up for the driver whose headlights strike it and stays dark for everyone else. Two optical systems do this: glass beads embedded in a resin, and microprismatic cube corners. Microprismatic sheeting returns considerably more light for the same illumination and dominates modern highway work.

Grades and where they are used

Sheeting is classified by its coefficient of retroreflection, measured at defined observation and entrance angles. Higher grades are specified where the sign or delineator is seen at a sharp angle — close to the vehicle, on a curve, or at a wide offset — because that is where cheaper sheeting collapses. A grade that performs well head-on can be almost invisible at a 30-degree entrance angle.

Why performance degrades

  • Ultraviolet exposure yellows the resin and reduces return over years of service.
  • Abrasion from grit, snow ploughs and washing scuffs the optical surface. Abrasion-resistant overlays exist precisely for guardrail and barrier positions.
  • Delamination at the edges lets water behind the optics; the affected area goes dark permanently.
  • Dirt is the reversible one, and the most common cause of a complaint about "failed" sheeting.

Retroreflectivity is measurable in service with a handheld retroreflectometer, which is the honest way to decide whether a run of delineators needs replacing rather than judging by eye at night.

Sourcing desk

Need the machine, not just the theory?

Send the specification and destination port. You get a factory-direct price, lead time and shipping estimate within two business days.