Sourcing desk · South Jinqiao Area, Pudong, Shanghai sale@machinerychina.org +86 21 6044 5623

Knowledge base · Earthmoving

Ditch Witch Organization Unveils Two New Compact Trenchers

76 words About 1 min read Published by YJMT
Ditch Witch Organization Unveils Two New Compact Trenchers

Photo: Trencher -machine -Vermeer1 by McKaby · CC BY-SA 4.0 via Wikimedia Commons

Answer The Ditch Witch®organization announces the release of two new walk-behind trenchers: the RT10 and RT12. both trenchers feature hydrostatic steering and offer a choice of high-flotation tires or heavy-duty, oscillating tracks.To find out…

The Ditch Witch®organization announces the release of two new walk-behind trenchers: the RT10 and RT12. both trenchers feature hydrostatic steering and offer a choice of high-flotation tires or heavy-duty, oscillating tracks.

To find out more about the new RT10 and RT12, please visit the Ditch Witch press Center, where you can download a press release and high-res photos. if you need anything, just send me an e-mail. Thank you for your continued support of Ditch Witch products.

Technical context from YJMT

Choosing a walk-behind trencher

The text above is an archived manufacturer announcement. The notes below are ours: general guidance on this class of equipment, with no specification attributed to any named product.

Chain against wheel

A chain trencher carries digging teeth on a chain running around a boom. It cuts narrow, deep trenches efficiently and dominates utility work. A wheel trencher carries teeth on a rotating wheel; it handles harder, more abrasive ground and rock better and produces a cleaner trench wall, at greater cost and weight.

For walk-behind machines laying cable, irrigation and small services, the chain trencher is the normal answer.

Specifying the machine

  • Depth and width. Set by the service being laid plus its bedding and cover. Ordering a machine on depth alone often produces a trench too narrow to bed the pipe correctly.
  • Ground conditions. This determines the machine more than depth does. Loose sand, heavy clay, frost and cobbles each call for different teeth and different power.
  • Access. The reason to choose walk-behind at all. Check the machine's width against the narrowest point on the route, including gates and between buildings.
  • Traction. Hydrostatic drive with independent track or wheel control lets the operator hold a straight line under cutting load, which is the difference between a neat trench and a wandering one.

Before the first cut

Locate buried services and scan the route. A trencher's teeth will go through a live cable or a gas main without hesitation. Confirm spoil placement — a trencher produces a windrow along one side, and on a narrow site there may be nowhere for it to go.

Sourcing desk

Need the machine, not just the theory?

Send the specification and destination port. You get a factory-direct price, lead time and shipping estimate within two business days.