Sourcing desk · South Jinqiao Area, Pudong, Shanghai sale@machinerychina.org +86 21 6044 5623

Knowledge base · Earthmoving

Solideal-Dumper Tire

32 words About 1 min read Published by YJMT
Answer Solideal”s dumper tire advantages:Natural rubber compounding for durability and longer tread life.Unique combination tread design for deep lug digging power.Extra sidewall and shoulder protection for better abuse resistance.Smooth ride in…

Solideal”s dumper tire advantages:



Natural rubber compounding for durability and longer tread life.
Unique combination tread design for deep lug digging power.
Extra sidewall and shoulder protection for better abuse resistance.
Smooth ride in all terrains.

Technical context from YJMT

Specifying site dumper tyres

The text above is an archived manufacturer announcement. The notes below are ours: general guidance on this class of equipment, with no specification attributed to any named product.

The tyre is part of the stability calculation

A site dumper is a small machine carrying a load that is heavy relative to its own mass, often across rutted ground and side slopes. The tyres are not merely consumables: their section width, inflation pressure and load index set how much the machine leans before it tips. Fitting a tyre with a lower load index than the manufacturer specified reduces the machine's stability margin even when nothing looks wrong.

Specification points that matter

  • Load index and speed symbol must meet or exceed the machine plate. Both, not just the load index.
  • Ply rating or load range governs sidewall stiffness — the difference between a tyre that folds under a side load and one that holds the machine square.
  • Tread pattern. Deep, self-cleaning lugs for mud and clay; a shallower blocky pattern for hardcore and concrete, where deep lugs simply wear away.
  • Sidewall protection. Most site damage is a cut from rebar, aggregate or a kerb, not tread wear. Extra sidewall rubber and a shoulder guard pay back quickly on demolition and groundworks.

Pressure discipline

Under-inflation is the single most common cause of premature dumper tyre failure. It flexes the sidewall until the casing overheats and separates, and it makes the machine wallow when tipping. Check cold, weekly, against the machine's plate rather than the number moulded on the tyre — the moulded figure is the maximum, not the working pressure.

Sourcing desk

Need the machine, not just the theory?

Send the specification and destination port. You get a factory-direct price, lead time and shipping estimate within two business days.