Sourcing desk · South Jinqiao Area, Pudong, Shanghai sale@machinerychina.org +86 21 6044 5623

Knowledge base · Crushing & screening

How to Size an Apron Feeder

226 words About 1 min read Published by YJMT
Feeding Machine

Photo: Vibrating Feeder by Grace Xiao · CC BY-SA 3.0 via Wikimedia Commons

Answer Sizing an Apron Feeder using a feeding factor of.8 has been introduced to compensate for voids, resistance to flow, etc. this factor, too, will vary with the type of material and its condition when fed.The following formula can be used to…

Sizing an Apron Feeder using a feeding factor of.8 has been introduced to compensate for voids, resistance to flow, etc. this factor, too, will vary with the type of material and its condition when fed.
The following formula can be used to calculate the approximate capacity in cubic yards of a feeder of given width where the feeding factor is determined to be other than.8:
Cu. Yds. Per Hr. = 2.22 (d x w x s x f); where:
d = depth of load on feeder, in feet;
w = width of feeder, in feet;
s = rate of pan travel, in feet per minute;
f = feeding factor.
To convert cu. yds. to tons, multiply cu. yds. by 1.35.

Sourcing desk

Need the machine, not just the theory?

Send the specification and destination port. You get a factory-direct price, lead time and shipping estimate within two business days.