Knowledge base · Crushing & screening
PROPORTIONAL NUMBER OF TUBE MILLS TO STAMPS
The number of tube mills necessary to form a combination foreconomical stage- grinding will depend upon the size at whichthe feed is delivered to the mills and the required size of theproduct. if we have heavy stamps crushing a big tonnage toa coarse mesh and this pulp must be slimed, we require moretube- mill area than where light stamps are delivering a 20-meshproduct to be reground to a 90-mesh screen; so unless we knowthe conditions of the metallurgical treatment and the physicalnature of the ore, it is possible to make only an approximationof the proportion of tube mills to stamps or to other crushingmachines.
Consulting this table it will be seen that with few exceptionsthe diameter of the tube mill for sliming gold ores is 5 ft. and that the length varies from 16 to 22 ft.; likewise we see that one tubemill may be used in combination with 10 stamps or with 20stamps.
In a tabulation based on a comparison of results from 75 stampsand one tube mill versus 75 stamps and four tube mills workingunder south African conditions, C. O. Smidt shows that the totalcosts of operating the two plants, when based on pulp of equalfineness, are as 35 to 46 in favor of the larger number of tube mills.
Sourcing desk
Need the machine, not just the theory?
Send the specification and destination port. You get a factory-direct price, lead time and shipping estimate within two business days.