Sourcing desk · South Jinqiao Area, Pudong, Shanghai sale@machinerychina.org +86 21 6044 5623

Knowledge base · Grinding & milling

PTO/Tractor Stump Grinders

49 words About 1 min read Published by YJMT
Answer These machines can grind stumps of any diameter and can work to a depth of 16 inches while simultaneously milling stumps and roots. for their correct use, a creeper gear transmission is required.Stump cutter for tractors between 130 and 350…

These machines can grind stumps of any diameter and can work to a depth of 16 inches while simultaneously milling stumps and roots. for their correct use, a creeper gear transmission is required.


Stump cutter for tractors between 130 and 350 HP with a max working depth of 24 inches.

Technical context from YJMT

How PTO stump grinders are matched to a tractor

The text above is an archived manufacturer announcement. The notes below are ours: general guidance on this class of equipment, with no specification attributed to any named product.

Power take-off basics

A PTO stump grinder takes its drive from the tractor's rear power take-off, so the two must agree on speed and spline before anything else. Agricultural tractors run either a 6-spline shaft at 540 rpm or a 21-spline shaft at 1000 rpm; a grinder built for one will be destroyed by the other. Check the shaft, the guard, and the tractor's rated PTO horsepower — not its engine horsepower, which is always the larger and more flattering number.

Matching the machine to the work

Cutting depth is usually quoted below grade. A grinder rated to around 400 mm will clear a stump for re-turfing but not for foundations, where the root plate has to come out entirely. Wheel diameter and tooth count set how fast it removes material; tooth type sets how it copes with grit.

A creeper gear or hydrostatic transmission matters more than raw power. The cutting wheel must be swept across the stump slowly and steadily; a tractor whose lowest gear is still too fast will stall the wheel and hammer the driveline.

Safety points that are not optional

  • Stump grinding throws chips and stones a long way. Keep bystanders well clear and use the discharge guard as fitted.
  • Never work with a damaged or missing PTO shaft guard.
  • Grind out foreign objects first. Fence wire, nails and buried concrete destroy teeth and can throw fragments.
  • Locate buried services before cutting below grade near a boundary or a building.

Sourcing desk

Need the machine, not just the theory?

Send the specification and destination port. You get a factory-direct price, lead time and shipping estimate within two business days.