Knowledge base · Cranes & lifting
Safe working loads of cranes and lifting appliances
The safe working load (S.W.L.) of a crane is defined in Regulation 1. It is the relevant safe working load as is required to be marked on the latest certificate of test and thorough examination issued by a competent person, in accordance with the requirements contained in Regulation 5 of these Regulations, see page 10.
All cranes must be marked with their S.W.L.'s and where the S.W.L. varies according to an alteration of the jib radius or the inclination of the jib, an indicator must be fitted to the crane which:
- Shows the safe working load for each change of radius or inclination, and which shall also show an indication of the radius or jib inclination; or
- Indicates the radius or inclination of the jib in such a way that the safe working load can be calculated by the crane driver from suitable tables provided in the cab of the crane.
The tables must be clear and legible, and always be maintained in that condition. They must be comprehensive so as to ensure that the driver is able to assess the safe working load at any operating radius or inclination of the jib at which the crane may be working at the time.
Safe working loads and a means of identification must also be marked on winches, pulleys and fork lift trucks.
The safe working loads of fork lift trucks are usually marked as a capacity at defined load centres. These safe working loads must always be related to the specification contained in the manufacturers handbook.
Safe working loads of cranes and lifting appliances are the maximum loads UNDER SPECIFIED CONDITIONS for which the crane or lifting appliance may be used. In relation to cranes, S.W.L.'s are generally calculated as a percentage of the maximum lifting capacity of the crane. This load will be the tipping load for certain cranes but for others, as structural failure may occur before the crane reaches a tipping condition in these circumstances, the ultimate load will relate to the manufacturers designed capacity of the crane. The margin between the safe working load and the ultimate load is a safety margin which allows for the various forces which will act on the crane under operational circumstances. It is therefore important to avoid sudden snatching or stopping of suspended loads and also to prevent pendulum swinging of the load whilst suspended.
Sourcing desk
Need the machine, not just the theory?
Send the specification and destination port. You get a factory-direct price, lead time and shipping estimate within two business days.