Sourcing desk · South Jinqiao Area, Pudong, Shanghai sale@machinerychina.org +86 21 6044 5623

Knowledge base · Earthmoving

Solideal-Wheel Excavator Tire

27 words About 1 min read Published by YJMT
Excavator
Answer Solideal”s Wheeled Excavator Advantages:Specifically designed tread offers greater mobility on soft ground100% natural rubber compounding and robust casing design provides excellent abuse resistance and maximum tread life.

Solideal”s Wheeled Excavator Advantages:



Specifically designed tread offers greater mobility on soft ground
100% natural rubber compounding and robust casing design provides excellent abuse resistance and maximum tread life.

Technical context from YJMT

Choosing tyres for a wheeled excavator

The text above is an archived manufacturer announcement. The notes below are ours: general guidance on this class of equipment, with no specification attributed to any named product.

Solid, resilient or pneumatic

Wheeled excavators work where punctures are expensive: demolition, scrap yards, recycling plant and steelworks. That is why solid and resilient tyres exist. A solid tyre cannot deflate, so an operator never loses a shift to a sidewall cut, but it transmits far more shock into the axle, the slew ring and the operator. A pneumatic tyre rides better and costs less, and on a clean site it is usually the right answer.

Resilient tyres sit between the two: a solid carcass with cushioning apertures or a softer intermediate rubber layer, trading some of the ride penalty back.

What to check before ordering

  • Rim compatibility. Solid tyres are press-on or bolt-together and are not interchangeable with a pneumatic rim without the correct wheel.
  • Load rating at the machine's real weight. Counterweight, boom, and any attachment all sit on the tyres. Rate for the heaviest configuration, not the bare machine.
  • Duty cycle and travel distance. Solid rubber builds heat when travelling. A machine that tramps between work faces all day is a poor candidate; one that tracks a few metres and then digs is a good one.
  • Tread pattern. A deep lug helps on soft ground; a smoother, wider footprint lasts longer on concrete and reduces surface damage.

Common failure modes

Chunking at the tread edge usually means the machine is travelling too far and too fast on solid tyres. Rapid, even wear on one side points at wheel alignment or a machine consistently working across a slope. Heat separation between rubber and carcass is a travel-speed problem, not a rubber-quality problem.

Sourcing desk

Need the machine, not just the theory?

Send the specification and destination port. You get a factory-direct price, lead time and shipping estimate within two business days.