Sourcing desk · South Jinqiao Area, Pudong, Shanghai sale@machinerychina.org +86 21 6044 5623

Knowledge base · Mining & minerals

AMALGAMATING IN TUBE MILLS

821 words About 4 min read Published by YJMT
Grinding Mill
Answer The most conspicuous example of amalgamating in a tube mill is no doubt the unique process of amalgamating the native silver ores at the Nipissing High-Grade mill, Ontario, Canada.

The most conspicuous example of amalgamating in a tube mill is no doubt the unique process of amalgamating the native silver ores at the Nipissing High-Grade mill, Ontario, Canada. while we have used an amalgam barrel for many years to amalgamate sand and scrap in a stamp mill the Nipissing mill has carried the idea to an extreme that the old amalgamators never dreamed of. the tube mill used is 3 ft. 11 in. by 19 ft. 8 in. running at 37 r.p.m. with 55 per cent, moisture and practically 100 per cent. 200-mesh in the product. a 5 per cent, solution of cyanide is used and 8,500 Ib. of mercury to 6,500 Ib. ore. the ore treated contains a high percentage of arsenic which under ordinary amalgamating conditions would be a difficult ore to treat. H. A. Megraw says: "The tube mill has its axial entrances sealed except for a small compressed- air pipe which enters it at one end and a corresponding air exit at the other end.... here then is a tube mill used as an amalgamating barrel, but under conditions which were probably never before sought for amalgamating purposes. the combination of an extremely high cyanide solution, a complex ore which contains all sorts of elements, and mercury all ground violently in a pebble mill, would seem to indicate the reverse of satisfactory.... the amount (of cyanide) originally added to the tube mill is sufficient to produce a very strong solution, which is capable of partially outlasting the destroying effect encountered within the mill. the agitation is continued for 9 hr., after which time 97 per cent, of the contained silver has been extracted from the ore." at the Plymouth Con., California, gold is amalgamated inside a Hardinge mill and on plates.

"The discharge from 30 stamps is classified and the coarse material ground in a Hardinge mill, the discharge from the Hardinge mill passing over two 5 by 8-ft. copper plates, at the top and the bottom of which are traps or wells of about 4 in. in depth. the upper traps catch as much as 70 per cent, of the gold without the use of quicksilver, it being used solely on the plates, which are cleaned once a day. after passing the first pair of plates the ore passes over a second set of ten 6 by 12-ft. plates, where a further recovery is made. the present system of amalgamation is proving both simple and efficient."

Sourcing desk

Need the machine, not just the theory?

Send the specification and destination port. You get a factory-direct price, lead time and shipping estimate within two business days.