Sourcing desk · South Jinqiao Area, Pudong, Shanghai sale@machinerychina.org +86 21 6044 5623

Knowledge base · Conveying & handling

Calculating and Determine Return Idler Load

256 words About 1 min read Published by YJMT
Calculating and Determine Return Idler Load

Photo: Industrial conveyor belt - geograph.org.uk - 4373595 by Martin Pearman · CC BY-SA 2.0 via Wikimedia Commons

Answer To select the correct Return Idler Series, it is necessary to determine the Static Load Per idler.4.Determine Static Load Per IdlerLs = Si x WbWhere:Ls = Static Idler Load (pounds per idler)Si = Return Idler Spacing (Table 5 lists…

To select the correct Return Idler Series, it is necessary to determine the Static Load Per idler.
4.Determine Static Load Per Idler
Ls = Si x Wb
Where:
Ls = Static Idler Load (pounds per idler)
Si = Return Idler Spacing (Table 5 lists recommended spacings)
Wb = Belt Weights in pounds per foot. (See table 6 for average belt weights).

5.Determine Working Load Per Idler
Lw = Ls (Fsp) (Fse) (Fe)
Where:
Lw = Return Idler Working Load (pounds per idler)
Ls = Static Load Per Idler (from 4 to above)
Fsp = Speed Factor (Table 7)
Fse = Service Factor (Table 9)
Fe = Environmental Factor (Table 10)

6.Select Return Idler Series
Using the Belt Width select the Idler Series from table 11 width a load rating greater than Lw for return idlers. (NOTE: if Ls is larger than Lw, use Ls).

Sourcing desk

Need the machine, not just the theory?

Send the specification and destination port. You get a factory-direct price, lead time and shipping estimate within two business days.