Sourcing desk · South Jinqiao Area, Pudong, Shanghai sale@machinerychina.org +86 21 6044 5623

Knowledge base · Conveying & handling

Operating Conditions of Conveyor Idlers

232 words About 1 min read Published by YJMT
Operating Conditions of Conveyor Idlers

Photo: Industrial conveyor belt - geograph.org.uk - 4373595 by Martin Pearman · CC BY-SA 2.0 via Wikimedia Commons

Answer Operating Conditions•Prefix “B” in model number denotes this seal.•Exposed seal parts – Aluminum labyrinth members.Buna-N wiping seal.Formed steel retainer for wiping seal.•Moderate seal drag.•Seals against fine material.•Seals against…

Operating Conditions
•Prefix “B” in model number denotes this seal.
•Exposed seal parts – Aluminum labyrinth members.
Buna-N wiping seal.
Formed steel retainer for wiping seal.
•Moderate seal drag.
•Seals against fine material.
•Seals against pressure wash down or extremely wet conditions.
•Factory sealed design can be re-greased, to rejuvenate the grease in the bearings by removing caps or plugs and inserting grease fitting.
•Requires periodic re-lubrification when furnished as re-greaseable type idler.
•Grease leakage when purging seals.
•Wiping seal will eventually wear away.
•Seal materials may be affected by some chemicals.
Loading point (Impact Idlers) – Normally, one-half the carrying idler spacing is recommended. for fine materials, place the idlers as close together as possible.
Convex Curves – One-half of normal spacing unless radius is small, then space closer.

Sourcing desk

Need the machine, not just the theory?

Send the specification and destination port. You get a factory-direct price, lead time and shipping estimate within two business days.