Knowledge base · Conveying & handling
Interchangeable Idler on Conveyor
Photo: Industrial conveyor belt - geograph.org.uk - 4373595 by Martin Pearman · CC BY-SA 2.0 via Wikimedia Commons
Interchange-ability is one of the most important features of the Rex Idler line, specifically in the dimensional areas of:
a.Backing Distance – from the bottom of the base to the center roll troughing idlers.
b.Bolt Hole Spacing – across the width of the conveyor frame for troughing and return idlers.
c.Bolt Hole Spacing – on the mounting pads of the idler and the customer’s frame for troughing and return idlers.
These dimensional measurements are now universal on Rex B, C and E Series Idlers. the chart on the next page shows the interchange possible between Rex Idlers and competitive makes. the combination of a universal mounting pad and adapter blocks permits these units to be interchanged with most Rex or competitive idlers as listed on the next page. the adapter block is available upon request at no additional charge.
Return idlers normally do Not require adapter blocks.
Sourcing desk
Need the machine, not just the theory?
Send the specification and destination port. You get a factory-direct price, lead time and shipping estimate within two business days.